ITEM

CONTENS

Minor load

HWDR-1

 98.07 N     10 Kgf

HWDR-3

 29.42 N     98.07 N       3.01 Kgf

Test load

HWDR-1

                                     588.4      980.7     1471     N

                                         60        100       150      Kgf

HWDR-3

 147.1     294.2     441.3     588.4     980.7     1471     N

     15        30          45         60        100        150    Kgf

Minor load position setting

 Automatic setting (LCD graph & electronic signal monitoring fine is unnecessary

Load control

 Automatic (Loading  - holding  - release)

Start operation

 Automatic  start / Manual start selection

Dwell Time

 1 -99 sec (key entry in units of seconds)

Plastic measurement

 Standard function, time up to hardness value display after release : 1 to 99 sec

Scale display

HWDR-1

 C, D, A, G, B, F. K, E, H, P, M, L, V, S, R

HWDR-3

 15 N, 30 N, 45 N, 15 T, 30 T, 45 T, 15 W, 30 W, 45 W, 15 X, 30 X, 45 X

 15Y, 30 Y, 45 Y, C, D, A, G, B, F, K, E, H, P, M, L, V, S, R

Data output

 1) Centronics (standard)

 2) RS232C or serial output selectable (Factory setting : RS232C)

Dta memory

 Max. 256 test data

 Hardness converstion

 Specified scale on real time display

 OK / NG criteria

 Upper and lower limits setting, and HI/OK/LOW display

 Data edition

Batch converstion of memorized measurment data(Meanvalue, max.value, min.value  standard deviation, dispersion (R)). Converted values, same too.

RS-232C Communication line

 Baud rete : 1200/2400/4800/9600 bps selectable(RS232C)

 Error detection, Parity even / Parity none / selectable (RS232C)

 Accuracy

 Conform to JIS B7726 and ASTM-18

 Max. speciemen height

HWDR-1

 250 mm

HWDR-3

 200 mm

 Max. Specimen depth

 160 mm

 Dimensions & Weight

W220 x D550 xH830 , 80 Kg

 Power supply

 Single phase AC 100 - 240V 50/60 Hz available for export model

 subject to chan without prior notic specification :